Machines

We are the manufacturer supplier and of a wide range of Cut Off Machines. These products are stringently tested on various parameters and are authenticated as per the international standards. All these products are resistant to corrosion and ensure long lasting service life. We are offering these products at affordable rates.

 

Features:

 

Accurate dimension
Longer service life
Low maintenance

WE ARE THE MANUFACTURER OF ARMATURE IN INDIA, In compliance with the standards laid down by the industry, these offered products are highly demanded. Besides this, we make sure that these are delivered safely, thus dispatch them after packing in high grade packing material to our customers.

We are the Suppliers of Heavy duty drills in indies with following specification

• Most commonly used for drilling in MS Plates/ heavy sections/channels/structures particularly in heavy fabrication jobs at project sites related with construction of power plants,steel plants, cement plants,irrigation gates, transmission line towers etc.For precise drilling operation it must be mounted on a Magnetic Drill Stand.
• An option of mounting it on a suitable bench drill stand is also available.

We are the Indian manufacturer of precision quality of hss drill bits also call as hig speed steel drill bit used for steel, concret and many more application.

kb industries are engaged in presenting a wide range of Cut Off Machines. These products are stringently tested on various parameters and are authenticated as per the international standards. All these products are resistant to corrosion and ensure long lasting service life. We are offering these products at affordable rates.

 

Features:

 

Accurate dimension
Longer service life
Low maintenance

These types of Torque Wrenches available in standard Across Flat sizes from 10 mm to 46 mm with Torque preset to one value as per bolt torque capacity of customer requirement. These Torque Wrenches can be used directly on bolt, there is no need of sockets.

We are the indian manufacturer of precision quality of hss drill bits also call as hig speed steel drill bit used for steel, concret and many more application.

We Are The Manufacturer of Extra Long HSS Drill In india , we also manufacturer of tapper twist Shank drill, parallel Shank drill, masonary drill, and many more

We hold expertise in offering a wide range of HSS Drill Bit. Owing to its application specific design, longer service life and precise dimensions, these devices are widely preferred by various numbers of clients. We offer these devices in various technical specifications. Our devices are properly quality checked on various parameters.
 
Features:

Cost effective
Perfect finish
Fine quality

We are the indian manufactuer and supplier of carbide tipped drill ans hss drill with variety of sizes available as per customers requirements.

we are specialist in Portable Electric Planners machine of various brands. Our products are made from high quality of raw material and latest technology. Easy to handle and operate, our electric power planner needs low maintenance cost.

Product Details:

We are The Indian Manufacturer of HSS Parallel Shank Drills. Our Twist drill are manufactured using supreme quality material under the strict supervision of vendor’s professionals. These drills are used for cast iron drilling, stainless steel drilling, and aluminum drilling & forged material drilling. Offered drills are available at affordable rates to the clients.

Features:

• Durable
• Sturdy construction
• Dimensional accuracy

Specifications:

HSS Band Saw Blade Cutters are new addition in ROHIT Products. These cutters are used by manufacturers of Band Saw blades. These items are manufactured against order as per customer specification. Materials available - M2, M35, M42 & ASP (powder metallurgy grades)

Our prestigious patrons can avail from us an extensive array of Parallel Shank Twist Drills, which is highly recognized in commercial sector for diverse purpose. Our vendors’ professionals developed these twisted drills using optimum quality material and advance technology. Patrons can get these parallel shank twist drills at reasonable price.
 
Features:

Durable
Reliable
Low maintenance

These spade drills for woodworking are avaialble in Both HSS & Carbide Material. For metalcutting Spade Drills contact us today for quote. Features of Spade Drills :

• These are much sturdy & stronger in design as compared to normal twist drills with long flutes, hence providing better performance.
• You can cut bigger holes with ease with Spade Drills
• Dia ranges from 4mm to 25mm, inch series also available on request

Product Details:

Other Top Products- Heavy Duty Impact Wrench, Tool Balancers, Flexible Shaft Grinders
Service Location-Mumbai, Bengaluru, Lucknow
Member Since 11 Years
Information Available- Email, GST, Mobile No.

We are providing CNC Bending Service. Clients can avail this service at reasonable price.

Product Details:

Other Top Products- Heavy Duty Impact Wrench, Tool Balancers, Flexible Shaft Grinders
Service Location-Mumbai, Bengaluru, Lucknow
Member Since 11 Years
Information Available- Email, GST, Mobile No.

We are providing CNC Bending Service. Clients can avail this service at reasonable price.

We Supply Of Copper Coil Tubes with a complete range of outer diameter and wall thickness combinations, engineered to exact specifications to meet the highest standards of performance as required by the refrigeration and air conditioning industry. These copper tubes are available in a variety of tempers to suit the intended applications. These copper tubes can be supplied either in straight lengths or coiled as per the requirement. Specifications Material Copper Range 1 OD to 6 OD in 22swg, 20swg, 18swg, 16swg, 14swg, 12swg, 10swg Length Single Random and Required Cut Length End Plain End Grade De-oxidized Electrolytic 99.9%

MODEL NO. Range MODEL NO. Range Square
Driver L
mm Weight
kg

KSP-12N 2-12 Nm KSP-120i 20-120 in.lb 1/4” 193 0.22

KSP-50N 5-50 Nm KSP-40F 4-40 ft.lb 3/8” 298 0.56

KSP-100N 15-100 Nm KSP-80F 10-80 ft. Lb. 3/8” 365 0.76

KSP-200N 50-200 Nm KSP-150F 40-150 ft. Lb. 1/2” 508 1.38

Backed by our vast experience, we have been able to offer a quality approved array of HSS (High Speed Steel) Center Drills . Procured from leading firms of the market, these high-grade HSS centre drills are manufactured using premium grade raw material and advance technologies. With support from our business associates, we are able to offer these drills in varied sizes, angles and dimensions.

These drills are used for making center holes in following metals:

Steel
High tensile steel
Cast iron
Chilled cast iron
Cr-Ni steel
Bronze
Features:

Sturdy construction
High performance
Long performing life
Specifically designed
Specifications:

Hardness: HRC60-66
Materials: HSS4241, W4, M2, W9, M35
Standard: DIN338B

Ordering No.Flute
Dia(D1)Flute
Len(L2)Overall
Len(L1)Shank
Dia(D2)No. of
Flutes

206010050-H 1 3 50 4 2

206015050-H 1.5 4 50 4 2

206020050-H 2 6 50 4 2

206025050-H 2.5 8 50 4 2

206030050-H 3 12 50 3 2

206030075-H 3 20 75 3 2

206030100-H 3 25 100 3 2

206040050-H 4 14 50 4 2

206040075-H 4 20 75 4 2

206040100-H 4 25 100 4 2

206050050-H 5 16 50 5 2

Features:

For machining pre-heat treated steels like P20, etc. up to hardness of 50HRC
Specially designed for pre-hardened materials

KB Industries manufactures HSS Centre Drills in Type B as per BS 328 Part-I or DIN 333 or IS : 6709 - 1977 standards.

Features:

Are made of SAE M2 grade (ROHIT 1X 0% Cobalt). SAE M35 grade (ROHIT 2X 5% Cobalt) is available on request
Are manufactured with ground flutes & bright finish, without or with coating (TiN / TiALN)
KB Industries Type B Centre Drills comes with 120o point angle with 60o included countersink
Centre Drills are designed with Spiral Flutes for producing high quality centre holes with protecting chamfer 120o, protected form

We are the specialist in machining of any jobs on milling, lathe, vms, and sheet metal works as per drawings

We are the Indian manufacturer of Cutt of wheels.
which Make fast, clean cuts in ferrous metals and stainless steel with these abrasive cut-off wheels! Tough aluminum oxide abrasive is continuously exposed during use to maintain an aggressive cutting edge.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

We are the indian manufacturer of precision quality of hss drill bits also call as hig speed steel drill bit used for steel, concret and many more application.

With state-of-the-art infrastructure facilities, we are engaged in offering a wide array of Jobber Drill Split Point. We provide Jobber Drill Split Point as per the requirements of our clients. These are highly appreciated in market due to their excellent quality and trouble free performance. Moreover, these are available in market at very economical prices.

Features:

• Best grade materials
• High performance
• Most reasonable prices

We are Indian supplier of Portable Electric Sanders. A sander is a power tool used to provide smooth wood and automotive or wood finishes by abrasion with sandpaper.
Features

• Powerful 1100 W motor and die cast aluminium body for extreme applications
• Designed for rapid removal of rough

Compatible Accessories Sanding Discs, Rubber Pads

We are The Manufacturer of Power Chucks for CNC machines, these chucks are used for machining work pieces that can be clammped with more grip & rigidity.

Power Chucks are used on CNC Machines to hold the component with more Grip & rigidity.

They are Opearted by Rotary Cylinders.

Power Chucks comes in 2,3 & 4 Jaws. Open center / Close Center. Now a days people are using these Power Chucks on Manual Machines also.

3 components are required rto operate Power Chucks.

1. Rotary Cylinder (Hollow / Close Bore)

2. Power Chuck (Hollow / Close Bore)

3. Hydraulic Power Pack

Our Carbide Engraving bits comes in various shank sizes, thickness, Overall Length & Angles. For ordering the Engraving Bits for your Jewelry making kindly furbish following details :

• SHK - Shank Size (from 3mm to 25mm)
• OVL - Overall length (from 30mm to 200mm)
• T - Thickness of point (from 0.2mm to 0.8mm)
• A* - Taper Angle (from 1* to 60*)
• CEL - Cutting length or reach length could be as per your requirement of engraving in your job

• Other Top Services- Machining Job Work, EDM Job Works,  CNC Milling Job Works, CNC Precision Components Job Work, CNC Turning JobWork Services
• Service Location- Mumbai_MMR
• Member Since 11 Years
• Information Available- Email, GST, Mobile No.

We are providing CNC Lathe Machining Job Works Services. Clients can avail this services at reasonable price.

We manufacture HSS Center Drills Type A with following standards BS 328 (Part-2), DIN 333 or IS 6708:1977.

Features:

Are made of SAE M2 grade (ROHIT 1X 0% Cobalt). SAE M35 grade (ROHIT 2X 5% Cobalt) is available on request
Are manufactured with ground flutes & bright finish, with or without coating (TiN / TiALN)
KB Industries Type A Centre Drills comes with 120o point angle with 60o included countersink
Centre Drills are designed with Spiral Flutes for producing high quality centre holes with protecting chamfer 120o.

We are indian a wholesaler, trader, and supplier, we are engaged in presenting Orbital Sander. The offered sander are carefully examined by quality inspectors against parameters of quality. These sander are fabricated by using best in quality material and current technology at vendor’s working place. We are offering these sander with diverse stipulations in order to satisfy our customer’s needs.

Features:

Longer service life
Easy to operate
Sturdy construction
Other Details:

Powerful condenser motor for excellent sanding operation
Strong cast aluminium body for rugged use
Provides uniform and smooth finish

We are India  supplier of Portable horizontal Sanders capacity 180mm. A sander is a power tool used to provide smooth wood and automotive or wood finishes by abrasion with sandpaper. 
Features
Powerful 1100 W motor and die cast aluminium body for extreme applications
Designed for rapid removal of rough Compatible Accessories Sanding Discs, Rubber Pads

KB Industries takes pride in designing and manufacturing HSS Drill Blanks for Drill & other tool manufacturers. If you need to make custom Drills or Tools with stiff tolerance of Run-Out & size tolerance than "ROHIT" Drill Blanks is the answer for you.

Features:

KB Industries Drill Blanks are maintained within Run-out of 20microns,
Drill Blanks are maintained within h6 tolerance,
Stiffer tolerance up to 5microns run-out can also be provided on order basis,
Drill blanks can be provided as per BS328 / DIN338N standards,
All Drill blanks come in bright finish,
Drill Blanks are available in M2 (0% Co), M35 (5%Co), M42 (8% Co), T42 (10% Co) & ASP high speed steel materials as per customer requirement.

With vast experience and knowledge we are involved in offering an extensive range of Jobber Drill. Jobber Drill is used for drilling in materials like Aluminum, non-ferrous materials, soft steel, MS and other materials. These Drills are made up of optimum quality material sourced from reliable vendors of the industry. Moreover, our clients can avail these at very feasible prices.
 
Features:

Best grade materials
High performance
Most reasonable prices

We have been the Manufacturer & Exporter of Power Operated High Speed Chucks With Through Bore are designed to rotate at high speeds on CNC lathes.

The compact construction of the PHNC Chucks offer further advantage of less weight and low inertia which have positive influence on the dynamic effect of CNC machine spindle. These chucks have a large through bore and therefore suitable for bar work.

The base jaws and top jaws weight are reduced in these chucks. This not only reduces the mass but also lowers the centre of gravity, which make the centrifugal losses low.