Machine

Ordering No.             RFlute
Dia (D1)Flute
Len (L1)L2Reach
Len (L3)Overall
Len (L4)Shank
Dia (D2)Neck
Dia (D3)Neck Taper Angle

215020601-H 1 2 4 6 23 60 6 2.9 1O30'

215020605-H 1 2 4 6 23 60 6 5 5O

215020803-H 1 2 4 6 41 80 6 5.7 3O

215030753-H 1.5 3 6 8 32 75 6 5.6 3O

215030901-H 1.5 3 6 8 52 90 6 5.3 1O30'

215040753-H 2 4 8 10 28 75 6 6 3O

Features:

KB Industries make TX Series end mills are suited for machining up to 50HRc hard materials.
For deep pocketing or deep reach applications
Also avaialble in 4-Flute above 2mm diameter
Designed with reinforced shank for higher stability
Long neck design for deep machining near walls

We have been the manufacturer of OD burnishing tools are available for plain & stepped shafts. Outer Diameter Burnishing Tools available for component OD 2mm and above. For component diameter greater than 30mm Bright Single roller tools are recommended.

Advantages of OD Burnishing Tools:

Burnishing Tools are available from 2mm and above adjustable Tool diameter within a range
Superior dimensional consistency after burnishing
Mirror surface finish in the shafts after burnishing
Single pass operation
Our  Burnishing Tools can be used in lathes, drill machines and CNC Machines
Quick return on investment
High productivity

WE Have been the Manufacturer, Exporter and Supplier of Roller Burnishing Tools in Pune. The Roller Burnishing Tools use the non-cutting machining process to produce mirror-like surface finish with low surface roughness of Ra-0.05um to Ra-0.35um. The Roller Burnishing Tools provide a consistently accurate size and increased hardness of the skin layer. The Roller Burnishing Tools are a type of cold working process where it removes the surface undulations generated after machining on metal by compressing the peaks of a metal's surface into the valleys like "ironing ". The Roller Burnishing Tools are used where a hole is required to be increased in size by few microns where it cannot be achieved by machining process like boring and also improve its surface finish, cylindricity and surface hardness. For any other applications requiring specific Roller Burnishing Tools, the products will be manufactured against order.

Salient Features:

Prefect size
Dimensional accuracy
Applications

Through hole
Shaft
Taper hole (male & female)
Surface

We are the manufacturer of Internal and External Tapers can be burnished with KB Taper burnishing tools. These tools can be supplied in any angles according to the component design. These tools are used to achieve good blue matching between mating parts.

Advantages of Taper Burnishing Tools:

Available from minor diameter 5mm and above
Highly suitable for matching tapers
Maximum blue matching after burnishing
Tools available in required taper angles
Can be used in lathes, drill machine and CNC Machines
Highly suitable for high pressure applications

We are involved in manufacturing and supplying a wide range ofHelical Gear Box. These Helical Gear Box are designed and tailored using high quality material that is sourced from reliable and trusted vendors of the market.We make sure that the highest quality raw materials are used in the manufacturing of these Parallel Shaft Helical Gear Boxes.

Features:

• Used in steel plants
• Our range of product : 3 HP to 400 HP

Product Details:

We Are The Indian Manufacturer and supplier of extra length Drill Bits as per customers specification,
We also Manufacturer the HSS TAPPER SHANK DRILL, HSS PARALLEL SHANK DRILL, MASONARY DRILL AND MANY MORE

We Are The Manufacturer And Supplier Of Threading Dia In India
The Details Of The Product Specification Is As Below

Threading dies are used to form or cut a male thread on the outside of rod or bars. Threading dies provide precision in cutting and extend the life of a die by reducing wear. Taps and dies are the tools used for cutting threads. A male thread (bolt) is fed between rollers that have the full thread form grounded into their outer diameter. The lobes mould the material into the required thread form and shape. Threading dies are used for either thread cutting or thread forming. Thread cutting can be internal or external. For large volume productions or for greater strength, threads are rolled for thread forming. Threading dies use rolled thread that has greater strength than a cut thread, though it usually requires more energy to roll a thread than cutting the thread.

Threading Dies have several variations including top adjusting screws, side adjusting screws or non adjustable screws. There are a variety of ways in which threading dies function. Threading dies cut a male thread and are used with taps which cut the mating female threads. A metric threading die represents thread by pitch instead of inch which is the method of thread designation in the United States. In metric thread dies, the thread pitch is specified in millimeters. A metric threading die is fundamentally different because the thread pitch is specified instead of threads per inch, or threads per millimeter. There are generally three types of taps: taper, plug, and bottoming. A tap cuts a female thread on the inside surface of a predrilled hole. A tap is lobed and does not have any cutting edges. It is forced into a hole and the material is changed into the required thread form by the lobes. Die head tap threading is used in the high volume production of threaded components. A chaser is inserted into the die head and the die head is closed bringing the chasers down to a cutting position. When sufficient length of thread has been cut, the head of the threading dies opens to allow the head to retract rapidly without interfering with the new thread formed. Threading dies are designed and manufactured to meet most industry specifications.

Threading dies are used in a variety of applications. Threading dies are commonly used in industrial metal working. Threading dies are used for repairing threads in stripped holes or bolts. Rolled threading dies have an increased advantage of strength, longer life, and reduced material cost. Taps are used in motorcycles, cars, and industrial machinery. Threading dies are also used for rethreading jammed pipes

We generally supply :

Circular split dies
Circular Solid Dies
Hex Die Nut

 

However, ground thread dies (lapped finish) can also be supplied.HSS Dies are generally produced from M2 grade.However, we can supply in M35 grade against specific requirement.Kindly note that our HSS DIES/DIE NUTS have GROUND RELEIF.This unique feature gives better cutting efficiency and improved thread finish.

 

 

Cutting Size range

 

 

:

 

1.0mm (1/8”) to 100mm (4”)

 

 

Pitch

 

:

 

0.2 to 6mm

 

 

16mm to 150mm

 

:

 

Outside diameter
l

Product Details:

We are well known Jobworks, exporter and supplier of highly efficient CNC Wire Cutting and EDM Spark Erosion. These machines are widely popular among automobile industries for their high effectiveness in machining very hard tungsten material. With optimal use of dielectric liquids for cutting operation, these machines are designed by meticulous professionals in varied specifications. Furthermore, we supply our offered machines at market leading rates to our customers.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 10000PC
• Delivery Time: 3-4 DAYS
• Packaging Details: PACKED AND SEAL IN BOX

We are the indian manufacturer of precision quality of taper shank drill bit, hss drill bits also call as hig speed steel drill bit used for steel, concret and many more application.

We are specialist in labour jobs for machining for miling, cnc, sheet metal works for any type as per drawings

These engraving cutters have long reach as shown in the image as compared to the flat shaped at the bottom type of Engraving Tool

• Best suited for processing in Rosewood, Hardwood,PVC, etc.
• Material of the engraving tool - Carbide & HSS
• HSS materials avaialle for End graving Tool M2, M35, M42 & T42

Engraving Tools or cutters for metal cutting are avaialble in different shapes & carbide material grade as per customer requirement of engraving. These are avaialble in Sub-Micron CarbideGrade material either Coated or Uncoated as per need, types of engraving tools avaialble are :

Half Straight Flute Engraving Bits or engraving cutters
Radiused Bottom Engraving Tool
Long CEL Flat Bottom Engraving Tool
Flat Bottom Engraving Tool  
These engravers find their way in almost all kind of product manufacturing industry where the names or numbers or codes to be mentioned on the parts. Mostly they are used in :

Die & Mold industry
Auto industry
Electronics industry
And other Product related industry

These engraving cutters have radius at the bottom or cutting edge to provide extra strength to the tool from chipping or breaking while working

Best suited for precision 3D engraving or embossing on Acrylic, PVC, MDF, Hardwood, Aluminum, etc.
Material of the engraving tool available - Tungsten Carbide & HSS
HSS materials avaialle for Engraving Tool M2, M35, M42 & T42

We are the Indian Manufacturer of  Masonry Drill Bit. Our professionals manufacture this offered range in accordance with the industry set quality norms employing rigid geometry. To procure all the raw material used to manufacture this range, our organization is associated with some of the selected trustworthy vendors of the market. Owing to durability and sturdy construction, our range is high in demand in the market. 

These engraving cutters are flat shaped at the bottom

• Best suited for processing in Acrylic, PVC, Wood, MDF, etc.
• Material of the engraving tool - Carbide & HSS
• HSS materials avaialle for Endgraving Tool M2, M35, M42 & T42

We are the manufacturer of Rotary masonary drill bit . Rotary Mansonary Drill bit are used in all rotary style drill motors. otary masonary drill bitt provides exceptional strength to minimize chipping of the carbide tip. Recommended for drilling in hard concrete aggregates and hard masonry products

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

We are the manufacturer of Masonary Drill Bit, masonary Drill are used in all rotary style drill motors. High Helix provides exceptional strength to minimize chipping of the carbide tip. Recommended for drilling in hard concrete aggregates and hard masonry products

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

manufactures various Drills to cater to needs of everchanging Auto, Aerospace, Defence, Medical & other general engineering. Our Solid Carbide Drills can challenge the most difficult job on planet. Here are different types / series of Carbide Drills available with us:

 

We are the indian manufacturer of Carbide Dill in india, the variety of carbide drill is mention below

Carbide JOBBER Series Drills - for general purpose drilling application up to depth of 9D
Carbide STUB Series Drills - for general purpose drilling application up to depth of 5D
Carbide HP - Coolant Fed Drills - for HIGH performance, BETTER finish and DEEP hole drilling
Carbide Step Drills & Combination Drills - we combine two or more applications in one tool; so as to reduce your tooling inventory and cycle time,
Carbide Steel Series HP Drills (2X-SM) - for machining steel and its alloys like Forged Steel, SS, and other steel alloys at elevated Feed & Speed rates,
Carbide Centre Drills
Carbide Spot Drills
Carbide Burnishing Drills

We are the indian manufacturer of Carbide Dill in india, the variety of carbide drill is mention below, Carbide drill is also available with titanium platings.

Carbide JOBBER Series Drills - for general purpose drilling application up to depth of 9D
Carbide STUB Series Drills - for general purpose drilling application up to depth of 5D
Carbide HP - Coolant Fed Drills - for HIGH performance, BETTER finish and DEEP hole drilling
Carbide Step Drills & Combination Drills - we combine two or more applications in one tool; so as to reduce your tooling inventory and cycle time,
Carbide Steel Series HP Drills (2X-SM) - for machining steel and its alloys like Forged Steel, SS, and other steel alloys at elevated Feed & Speed rates,
Carbide Centre Drills
Carbide Spot Drills
Carbide Burnishing Drills

We have been the manufacturer of Spiral Bevel Gear. Offered gear is manufactured with the use of supreme quality raw material and cutting-edge technology. This gear is checked on different quality parameters under the supervision of our quality controllers. Moreover, this gear is widely used in portable power tools, gear boxes, machine tools, etc. We offer this gear at industry leading price to the clients.

 

Features:

 

• Precise design

• High tensile strength

• Corrosion resistance

• Dimensional accuracy

Features:

• Made from fine quality of raw material
• Durability
• Resistance to corrosion
• Optimum performance
• Long lasting
• Affordable prices

With an aim to satisfy our clients, we are engaged in offering an extensive range of Jobber Drill Set. Jobber Drill Set contains Wood Drill bit set, metallic drill, precision engineered drill and many other drills. These are highly appreciated for their various attributes such as long lasting service and durable in nature.
 
Features:

Efficient functionality
User-friendly interface
Compact design

We are the dealer of  Mini Air Grinders / Air Angle Die Grinder to our clients. These mini air grinder are featured with rear exhaust with baffle for reduced noise level and safe throttle lever to stop accidental operation. These grinders are widely used in metalworking and construction, as well as in emergency rescues.These are offer at industry Leading prices.

Features:

Low maintenance cost
Reliable performance
Energy efficiency
Compact design

We are regarded as the leading manufacturer and exporter of Helical Gears. Offered gears are precisely engineered using high quality raw material and latest technology. These gears are used in various machines like packaging machines, starter motor, printing machines, gear boxes, bakery equipment, agriculture machines, machine tools and many more applications. The offered gears are available in various no of teeth for different applications. Our clients can avail these gears from us at very reasonable rates.

 

Features:

 

Corrosion resistance

High performance

Easy installation

Durability

Helical Gears:

Up to Dia = 1000 mm(4.5 Mtr)
Up to Pitch = 12 Moduel

KB Click Type Tool Torque Wrenches are of an innovative design concept, providing consistently accurate readings and rugged, (Trouble Free) Performance. Our Torque Wrenches have a proven performance record and we offer a Free Replacement Guarantee on our complete range of Torque Wrenches, against any premature failure..

We are the Indian manufacturer of Cutt of wheels. which Make fast, clean cuts in ferrous metals and stainless steel with these abrasive cut-off wheels! Tough aluminum oxide abrasive is continuously exposed during use to maintain an aggressive cutting edge.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

We have been the manufacturer Carbide Tips that are specially designed for specific applications. these tools are dimensionally accurate and manufactured as per the prevailing quality standards. Cost effectiveness and customization are the special attributes of this range.

Features:

High tensile strength
Excellent finish
Dimensionally accurate

We are the manufacturer of Carbide Tips that are specially designed for specific applications. these tools are dimensionally accurate and manufactured as per the prevailing quality standards. Cost effectiveness and customization are the special attributes of this range.

Features:

High tensile strength
Excellent finish
Dimensionally accurate

We are the manufacturer exporter and supplier of large range of high quality abrasive grinding wheels, flap wheels,that is immensely used for the grinding and cutting purposes. Grinding wheel provided by us is in huge demand in the market for long lasting excellent functional life. Dimensional accuracy, easy installation and low maintenance cost are some of the salient characteristics of our grinding wheel. We offer grinding wheel within the specified time frame as we know the value of time vested by the clients. We stand in the midest of major imported grinding wheel importer and suppliers based in india.

Grinding wheel ,grinder norton bosch ,kpt,hitachi ,n. K. K, speet fire ,bear,

These V-Bits are avaialble in different shapes in both Carbide & HSS materials. In HSS you can get V-Bit in M2, M35, M42 & T42 grades as per your reqirement.
 
Kindly send us the Specifications of V-Bit and we will be happy to send you quote for V-Bit Cutters.

Owing to our state-of-art manufacturing unit and the usage of leading-edge techniques, we are able to present a comprehensive range of SS Drill Bit. Keeping in mind the latest market development, the offered drill is manufactured under the guidance of deft engineers employing superior grade raw material with the aid of pioneered technology at our vendors’ end. Apart from this, this drill is examined on various parameters by quality inspectors for ensuring its flawlessness.
 
Features:

Precisely designed
Accurate dimension
Anti-corrosive

WE ARE THE INDIAN MANUFACTURER AND SUPPLIER  OF DRILLS  IN FOLLOWING CATEGORIES

1. Drills
2. Taper Shank Twist Drills
3. Center Drills B
4. Straight Shank Twist Drills
5. Straight Shank Spiral Drills
6. Jobber Drill
7. HSS Twist Drills
8. Pilot Drills rills and drill bits are used in many industrial applications for machining of metals, plastics, and other materials, construction, woodworking, and specialty applications and crafts such as gemology and medical surgery. Many of the cutting edge features and specifications are application-dependent, as are the optimal feed rates and cutting speeds.

Drill bits can be supplied in one of four standard size units. These include English or fractional, metric, wire gauge, and letter size. An English drill bit is designed with base units of inches or fractions of an inch. A metric drill bit is designed with metric base units such as millimeters or centimeters. A wire gauge drill bit is designed in standard wire gauge sizes, designated 1 to 80. A letter size drill bit is designed in standard letter designation sizes from A to Z. The full tool-cutting diameter is an important specification when considering drill bits.

Drill bits are available for different drill types. These include standard or twist drills, jobber length drills, taper length drills, extension or extra length drills, screw machine drills, spotting drills, center drills, micro drills, gun drills, core drills, spade drills, step drills, silver and Deming drills, Forster drills, taper drills, high helix drills, masonry drills, surgical or dental drills, hole saw, wood bit, combination drill and countersink, combination drill and counter bore, combination drill and tap, and drill blank.

Rotation on drill bits can be either right hand or left hand. Right hand drill bits are the most common. They are designed to cut while turning clockwise. Left hand drill bits are designed to cut while turning counterclockwise. Drill bits may have NAS specifications stating that they are manufactured in accordance with National Aerospace Standards (NAS). Some drill bits are coolant fed; they have a hole or channel for directed coolant feed at or near the cutting edges. Split point drill heads are used for chip clearance and for good centering, avoiding "walking" on the workpiece on initial contact.

Drill bits can be of solid construction or a holder and inserts. In a solid construction the drill is manufactured from a solid piece of material. In a holder and inserts construction the drill is constructed with a holder with attachable inserts; these inserts typically bolt onto the holder are replaceable when the cutting edges are worn.

 

Product Details:

We are the manufacturer and supplier of masonry drill as per customers specification,
we are also manufacturing hss taper shank twist drill, hss parallel shank twist drill masonry drill, and many more. For more information please visit to our side.

We are a top-notch organization, engaged in providing Deutz Engine.

We are the Indian Manufacturer of Grinding wheels of many sizes and quality,
our manufacture depressed center wheels have a unique formulation for better blending, finishing, and polishing of stainless steel, structural steel, cast iron welds, and burrs.
Our range is available in different sizes and specifications, which can also be customized as per the requirement of our clients.

Features:

Excellent finish
Intricate design
Easy to fix

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Extra Heavy Duty Slugging / Striking Wrenches are designed for use with hammers where impact or shock loading is required for loosening of frozen and rusty nuts and bolts. These slugging wrenches are duly forged from superior grade chrome vanadium steel. The blanks are duly machined with the wrench openings broached to tolerance as per federal specifications. These slugging wrenches undergo a heat treatment process including stress relieving before undergoing short blasting and surface finish operations.