We offer HSS End Mills in 4Flute with ground flutes up to 12mm & milled flutes above 12mm.
Standard available in mm series IS 6353 & Imperial sizes as per BS-122
Available in sizes range of 2mm to 50mm diameter
Available in parallel shank
30degree Helix angle with Right Hand Helix & Right Hand Cutting is available as standard
HSS End Mills are used for cutting keyways, slots & for plunging operations
For higher performance use ROHIT 2X series HSS End Mills i.e SAE M35 5% Cobalt grade for best results.
Standard end mills are without coated but can be provided with TiN / TiALN coating on request
HSS End Mills are availabe in SAE M2 (ROHIT 1X 0% Cobalt) & SAE M35 (ROHIT 2X 5% Cobalt) grades
HSS SAE M42 (ROHIT Special 8% Cobalt) End Mills available on request with associated MOQ's and delivery time.
OD/ID ratio is small to fit standard flanges kb Flange Washers are a type of Belleville spring. The main distinction of a flange washer design relative to most Belleville spring designs is that theOD/ID ratio is small to fit standard flanges. Solon Flange Washers are designed to maintain sufficient bolt tension and resultant gasket pressure. This allows the flange washers to be used in applications where bolts are in close proximity. In addition, the flat loads for flange washers are generally high to meet the demands of many flange live loading applications. Significantly reduce the risk of failure Live Loading using Solon Flange Washers willsignificantly reduce the risk of failureby maintaining more of the original bolt preload. kb Flange Washers are ideal for maintaining bolt preload to live load gaskets and valve packing, thereby preventing flange and valve stem leaks
We are the manufacturer of counterbores with solid pilot are designed for machining as
fillister screw caps or ejector caps in molds
Available in inches 1/2" - 2.1/2"
and in MM from 12-65mm
Coating is available for better life of tool
We Are The Manufacturer and Supplier of End Mill cutter , straight and shank types.
Features of our Endmill Cutter
Flutes - Spiral cutting edge on the end mill. 2 and 4 flute end mills are the most commonly used.
2-Flute - Allows maximum space for chip ejection. Used for general milling operations.
3-Flute - Excellent for slotting. Used for general milling operations.
Specifications HSS Slitting Saw Blade HSS Rotary Slitter Knives and Blades
Manufactured as per buyer's technical data
HSS Slitting Saw Blade HSS Rotary Slitter Knives and Blades for paper industry use
HSS Slitting saw Blade HSS slotting blade Metal slitting saw blade
Manufacture as buyer's technical data.
Material: HSS M2 (W6%-Mo5%-Cr4%-V2%) and M35
Coating also availableWe are manufacturer and supplier of milling cutter , slitting cutter.
Used for light and heavy deep slot operations in steel and in most soft material. These side face cutters are extensively used in the production such as tool cutter grinder milling machine, lathe machine, hexa machine and beach grinder machine and are available in varying diameters and widths.
Applications Side Face Cutters are available in following types: