THREADING TAPS AND DIE

We Are The Indian Manufacturer And Supplier Of Threading Taps As Per Below Specification

Roughing Tap

the Straps eight fluted made undersize to reduce the load on the finishing tap and particularly for difficult tapping operations. Recommended for use when tapping steels o close tolerance fits as required, reducing wear on the finishing tap.

 

Finishing Tap

Hand or machine tapping for through holes and blind holes where ample chip clearance is available. The lead chamfer permits easier starting and requires less tapping torque than bottoming taps.

 

Bottoming Tap

Used for tapping blind holes when maximum full form threads are required in minimum depth holes.

 

Spiral Flute Tap

Tap designed with spiral flutes in the same “hand” as the thread. This directs the swarf backwards out of the hole. Recommended for blind or deep hole applications in soft (eg. Aluminium) materials. Due to the suitability blind hole tapping the lead chamfer is normally that of a bottoming tap.

 

Spiral Point Tap

Designed primarily as a machine tap for tapping through holes. The Spiral Point is formed in the lead teeth at an angle to the tap axis. The swarf, due to the cutting action, is pushed forwards ahead of the tap. The flutes of the spiral point tap serve only to deliver coolant to the cutting edges, therefore much shallower flutes are used. Subsequently the tap has greater strength and makes precise tapping possible.

 

Not recommended on abrasive materials :

 

1. Standard Taps as per IS, DIN, ISO, British standards in all thread forms and pitches.
2. Special Taps including Left Hand Taps, Taps with Profiles like Acme, Trapezoidal, Buttress, Pg etc. and Taps as per your drawings. We produce above taps in HSS M2 grade but we can offer taps in HSS M35 and M42 grades.
3. Thread Milling Cutters, Pipe Threading Systems, Tap Wrenches and Die Stocks.

We are the manufacturer supplier and exporter of threading taps.
We Know that Internal threading is done by using a tool called a TAP in a hole drilled to a specific diameter for the thread size and pitch you want to cut. External threads, such as for bolts and studs, are made by using a tool called a DIE, which is applied to a specific diameter of rod for the size and pitch of the threads you want to cut.